V136-4.5 MW™

The V136-4.5 MW™ is optimised to deliver superior energy production in medium-wind conditions.

V136-4.5 MW™ at a glance

The V136-4.5 MW™ is designed for low to medium wind conditions. For sites where permits allow, it boosts energy production performance by +3 percent compared to the V136-4.2 MW®. With the same max sound power level as the V136-4.2 MW, it enables permitting and project realisation in sound-critical areas.

Options
available for the
V136-4.5 MW™ IEC IIB

  • 4.5 MW Power Mode 
  • High Wind Operation 
  • Condition Monitoring System 
  • Service Personnel Lift 
  • Vestas Ice Detection™ 
  • Low Temperature Operation to - 30°C 
Learn more about the available options and solutions
  • Fire Suppression 
  • Vestas Shadow Flicker Control System
  • Vestas Bat Protection System 
  • Aviation Lights 
  • Aviation Markings on the Blades 
  • Vestas InteliLight®

4 MW

The Vestas 4 MW platform sets new standards for onshore wind performance within regimes ranging from very strong wind and typhoon conditions to low wind.

IEC IIB

The V136-4.5 MW™ is optimised to deliver superior energy production in medium-wind conditions..

+51 GW

The performance and versatility of the 4 MW platform has been proven with more than 51 GW installed in 53 countries since 2010.

V136-4.5 MW™ is optimised to deliver high and efficient production in medium-wind conditions.

View the 4 MW Brochure

Technical specifications

Power regulation operational data
Pitch regulated with variable speed
Rated power
4,500kW
Cut-in wind speed
3m/s
Cut-out wind speed
32m/s
Re cut-in wind speed
28m/s
Wind class
IEC IIB
Standard operating temperature range
from -20°C to +45°C with de-rating above 23°C*
SOUND POWER
Maximum
103.9 dB(A) Sound Optimised modes dependent on site and country
ROTOR
Rotor diameter
136m
Swept area
14,527m2
Aerodynamic brake
full blade feathering with 3 pitch cylinders
ELECTRICAL
Frequency
50/60 Hz
Converter
full scale
GEARBOX
Type
two planetary stages and one helical stage
TOWER
Hub heights
Site and country specific
NACELLE DIMENSIONS
Height for transport
3.5m
Height installed /incl. CoolerTop)
8.4m
Length
12.96m
Width
3.98m
HUB DIMENSIONS
Max. transport height
3.5m
Max. transport width
3.7m
Max. transport length
5.5m
BLADE DIMENSIONS
Length
66.7m
Max. chord
4.1m
Max. weight per unit for transportation
70 metric tonnes
SUSTAINABILITY METRICS
Carbon Footprint
7.6g CO2e/kWh
Return on energy break-even
7.5 months
Lifetime return on energy
32 times
Recyclability rate
88.5%
Configuration 132m hub height and wind class IECIIIA. Depending on site-specific conditions

4 MW Platform

Our 4 MW platform is designed for a broad range of wind and site conditions, onshore and offshore enabling you to mix turbines across your site or portfolio of sites, delivering industry-leading reliability, serviceability and exceptional energy capture.

The 4 MW platform was introduced in 2010 with the launch of the V112-3.0 MW®. Over 51 GW of the 4 MW platform has been installed all over the world onshore and offshore making it the obvious choice for customers looking for highly flexible and trustworthy turbines.

Rotor diameters range from 105 to 155 meters and the rated output power is up to 4.5 MW. Using well proven technologies like a full-scale converter, the 4 MW platform meets even the most challenging grid requirements providing excellent energy yield in all wind and weather conditions.

Large Diameter Steel Towers (LDST) are also available to optimise annual energy production on low wind sites.

The 4 MW platform combines Vestas’ proven track record with our continuous efforts to improve and optimise our products, making it the obvious choice for customers looking to combine reliability with performance.

Related products

V162-6.2 MW™

With a swept area of over 20,000m², the V162-6.2 MW™ applies the largest rotor size in the Vestas portfolio to achieve industry-leading energy production paired with a high capacity factor.

V150-6.0 MW™

The V150-6.0 MW™ lifts the larger rotor introduced with V150-4.2 MW™ into stronger wind speeds. Combined with its higher generator rating, it increases the production potential at turbine level by more than 20 percent compared to V150-4.2 MW™ in medium wind speed conditions.

V136-4.2 MW™

The V136-4.2 MW™ is designed for medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW™