V110-2.0 MW®

The V110-2.0 MW® IEC IIIA is an extremely reliable turbine, which is documented through its strong availability and performance. 

V110-2.0 MW®   at a glance

The V110-2.0 MW® IEC IIIA is an extremely reliable turbine, which is documented through its strong availability and performance. This turbine allows you to increase productivity by opening up low-wind sites which were previously regarded as non-viable. To maximise power output at such locations, the turbines' 110 m rotor gains more from the available wind – starting at an incredibly low 3 m/s. With its 54 m blades, the V110-2.0 MW® IEC IIIA delivers a notable rotor-to-generator ratio producing a remarkable capacity and yield at low- and medium-wind sites.

Features:

  • Vestas OptiStop pitch control strategy included to reduce loads and enable a lighter structure
  • Select products from the Vestas PowerPlus™ range are added to maximise output
  • High Wind Operation 
  • Power Mode (site specific)
  • Condition Monitoring System
  • Vestas Ice Detection
  • Smoke Detection
  • Vestas Shadow Flicker Control System
Learn more about the available options and solutions
  • Low Temperature Operation to -30˚C
  • Aviation Lights
  • Aviation Markings on the Blades
  • Vestas InteliLight™
  • Vestas Bat Protection System

+46,000

The Vestas Performance and Diagnostics Centre monitors more than 46,000 turbines worldwide. We use this information to continually develop and improve our products and services.

IEC IIB/IEC S

Finding the right turbine for your wind site is key. The V120-2.2 MW™ IEC IIB/IEC S is designed for low to medium wind sites with low turbulence.

+55 GW

The performance and reliability of the 2 MW platform has been proven with more than 55 GW installed worldwide since 2000.

V110-2.0 MW® delivers a notable rotor-to-generator ratio with its 54 m blades producing a remarkable capacity and yield at low- and medium-wind sites with high turbulence.

View the 2 MW brochure

Technical specifications

POWER REGULATION OPERATIONAL DATA
Pitch regulated with variable speed
Rated power
2,000kW/2,200kW
Cut-in wind speed
3m/s
Cut-out wind speed
20m/s
Re cut-in wind speed
18m/s
Wind class
IEC IIIA
Standard operating temperature range
from -20°C* to 40°C
Standard operating temperature range low temperature turbine
from -30°C* to 40°C
SOUND POWER
Maximum
107.6 dB*
* Serrated trailing edges available to reduce sound power level
ROTOR
Rotor diameter
110m
Swept area
9,503 m2
Aerodynamic brake
full blade feathering with 3 pitch cylinders
NACELLE DIMENSIONS
Height for transport
4 m
Height installed (incl. CoolerTop®)
5.4 m
Length
10.4 m
Width
3.5 m
ELECTRICAL
Frequency
50/60 Hz
Converter
4-pole (50 Hz)/6-pole (60 Hz) doubly fed generator, slip rings
GEARBOX
Type
one planetary stage and two helical stages
TOWER
Hub heights
80 m (IEC IIIA), 95 m (IEC IIIA/IIIB), 110 m (IEC IIIB), 120 m (IEC IIIB) and 125 m (IEC IIIB)
HUB DIMENSIONS
Max. transport height
3.4
Max. transport width
4m
Max. transport length
4.2m
BLADE DIMENSIONS
Length
54m
Max. chord
3.9m
Max. weight per unit for transportation
70 tonnes
SUSTAINABILITY METRICS
Carbon footprint
7.2 g CO2e/kWh
Return on energy break-even
8 months
Lifetime return on energy
31 times
Recyclability rate
84.5%
Configuration 80m hub height and wind class IECIIIA. Depending on site-specific conditions
Power regulation operational data
Pitch regulated with variable speed
Rated power
2,000 kW
Cut-in wind speed
3m/s
Cut-out wind speed
20m/s
Re cut-in wind speed
18m/s
Wind class
IEC IIIA
Standard operating temperature range
from -20°C* to 40°C
Standard operating temperature range low temperature turbine
from -30°C* to 40°C

2 MW Platform

Our 2 MW platform provides industry-leading reliability, serviceability and availability and is one of the most trusted platforms in the industry. The platform is built on technology that has been proven in the field over more than a decade.

With the latest addition of rotor sizes, the 2 MW platform offers a competitive selection of turbines for all wind segments. The platform’s predictability allows customers to forecast confidently, while the tried-and-tested design ensures energy production at the lowest possible cost on low, medium 

and high-wind onshore sites, even in extreme weather conditions.

In addition, remote monitoring and easy servicing keep operational costs at a minimum, while its highly-tested components and power and control systems enhance reliability.

With more than 55 GW of the 2 MW turbines installed since 2000, the 2 MW platform has become one of the most popular platforms in our portfolio, making it an obvious choice for customers looking to get the most out of their investment.

 

 

Related products

V120-2.2 MW™

The V120-2.2 MW™ IEC IIB/IEC S is built to generate more energy in stable low to medium wind conditions.

V100-2.0 MW®

The V100-2.0 MW® IEC IIB turbine features the Vestas OptiStop pitch control strategy to maximise your output on low to medium wind sites.

V90-2.0 MW™

The V90-2.0 MW™ is suited for high wind sites with rotor size constraints.