This website uses cookies. The third part cookies used on this website are used to gather information about how people navigate the site. If you continue to use our website, you accept the use of cookies. Find out more about cookies used on and how to delete them here. Cookie Policy

V150-6.0 MW™ at a glance

The V150-6.0 MW™ lifts the larger rotor introduced with V150-4.2 MW™ into stronger wind speeds. Combined with its higher generator rating, it increases the production potential at turbine level by more than 20 percent compared to V150-4.2 MW™ in medium wind speed conditions. 

Applying Vestas’ most advanced aerofoil blade design combined with lower rotational speeds of the EnVentus™ drivetrain, means realisation of power production potential at very low sound power levels. A comprehensive portfolio of standard and site-specific towers allow for application in tip height constraint markets, varying from 180m to 230m. 

Utilising Vestas LDST tower technology, V150-6.0 MW™ can take advantage of favorable wind conditions at 166m hub height.

Options available for the V150-6.0 MW™ IEC S

  • Condition Monitoring System
  • Oil Debris Monitoring System
  • Service Personnel Lift
  • Low Temperature Operation to -30°C
  • Vestas Ice Detection™
  • Vestas Anti-Icing System™
  • Vestas InteliLight®
  • Vestas Shadow Detection System
  • Aviation Lights
  • Aviation Markings on the Blades
  • Fire Suppression System
  • Vestas Bat Protection System
  • Lightning Detection System
  • Load Optimised Modes

Read more about the available options and solutions >

6.0 MW

Connecting proven system designs from the 2 MW, 4 MW, and 9 MW platforms, EnVentus™ variants feature a nominal rating of 6.0 MW.


The V150-6.0 MW™ is designed for medium to high wind speeds with high turbulence capacity, offering a large operational envelope.

40 years

With more than 117 GW of wind turbine capacity installed and 40 years of experience in relentlessly pursuing performance improvements, EnVentus™ is Vestas' next generation in the evolution of wind turbines.


V150-6.0 MW™ IEC S

The V150-6.0 MW™ IEC S offers a large operational envelope and double-digit annual energy production improvements in medium to high wind speeds, depending on site-specific conditions.

View the EnVentus™ brochure

Technical Specifications

POWER REGULATION Pitch regulated with variable speed
Rated power
Cut-in wind speed
Cut-out wind speed 25m/s
Wind class
Standard operating temperature range
from -20°C* to +45°C
*subject to different temperature options  
**Sound Optimised Modes dependent on site and country
Rotor diameter
Swept area
Aerodynamic brake full blade feathering with 3 pitch cylinders
50/60 Hz
full scale
Type two planetary stages
Hub heights
105m (IEC S), 125m (IEC S),
155m (IEC S)

AEP Curve

EnVentus™ platform

The EnVentus™ platform is the result of meticulous and careful evaluation of an unbroken line of Vestas technology solutions. With more than 117 GW of wind turbine capacity installed and 40 years of experience in relentlessly pursuing better performance through technology and service, EnVentus™ is Vestas' next generation in the evolution of wind turbines.

Introduced in 2019, the EnVentus™ platform architecture connects proven system designs from the 2 MW platform, 4 MW platform and 9 MW platform turbine technology. The result is one versatile platform architecture that delivers a higher level of robustness and performance with the ability to create an even more finely matched combination of turbines to harness available wind energy in any specific location. Through advanced modularity in design, EnVentus™ aims to meet customisation needs more efficiently. The wide range of standard hub heights, options, and modes of operation contribute to the ability to meet project specific requirements.

Related products

V162-6.0 MW™ IEC S

With a swept area of over 20,000 m², the V162-6.0 MW™ applies the largest rotor size in the Vestas portfolio to achieve industry-leading energy production. The V162-6.0 MW™ IEC S is designed for low to medium wind sites, with extensive application in high wind speeds.


With the V150-4.2 MW™ Vestas leads onshore wind power to new heights. With 73.7 meter long blades and the industry’s tallest tower, the V150-4.2 MW™ stretches nearly a quarter of a kilometer into the air.

V136-4.2 MW™ IEC IIB/IEC S

The V136-4.2 MW™ is designed for medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW™