This website uses cookies. The third part cookies used on this website are used to gather information about how people navigate the site. If you continue to use our website, you accept the use of cookies. Find out more about cookies used on vestas.com and how to delete them here. Cookie Policy

V136-4.2 MW™ at a glance

The V136-4.2 MW™ is designed for low to medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW®, and with 103.9 dB(A) max sound power level enables permitting and project realisation in sound critical areas.


Options available for the V136-4.2 MW™ IEC IIB/IEC S

Vestas | Options available for the V126-3.3 MW™ IEC IIIA
  • High Wind Operation
  • Power Optimised Mode up to 4.2 MW (site specific)
  • Load Optimised Mode down to 3.6 MW
  • Condition Monitoring System
  • Service Personnel Lift
  • Vestas Ice Detection
  • Low Temperature Operation to -30°C
  • Fire Suppression
  • Shadow Detection
  • Increased Cut-In
  • Nacelle Hatch for Air Inlet
  • Aviation Lights
  • Aviation Markings on the Blades
  • Vestas InteliLight™
  • Lightning Detection System


    Read more about the available options and solutions

V136-4.2 MW™ Extreme Climate

The V136-4.2 MW™ Extreme Climate offers maximum energy production in low to medium wind speeds, while being designed for extreme weather conditions. It is capable of withstanding extreme average wind speeds of 53m/s (exceeding IEC class I extreme wind speed). Based on the proven V136-4.2 MW™, the Extreme Climate variant features an enforced hub and blade design, and it is applicable both onshore and offshore.

View the V136-4.2 MW™ Extreme Climate Brochure >


4 MW

The Vestas 4 MW platform sets new standards for onshore wind performance within regimes ranging from very strong wind and typhoon conditions to low wind.


IEC IIB/IEC S

The V136-4.2 MW™ IEC IIB/IEC S is designed for medium wind sites.

+23 GW

The performance and versatility of the 4 MW platform has been proven with more than 23 GW installed in 44 countries since 2010.

The V136-4.2 MW™ IEC IIB/IEC S

The V136-4.2 MW™ IEC IIB/IEC S is optimised to deliver high and efficient production in medium-wind conditions.

4MW Brochure

Vestas | The V126-3.3 MW™ IEC IIIA turbine

Technical Specifications

OPERATIONAL DATA
Rated power
4,000/4,200 kW
Cut-in wind speed
3 m/s
Cut-out wind speed 25 m/s
Re cut-in wind speed
23 m/s
Wind class
IEC IIB/IEC S
Standard operating temperature range
from -20°C to +45°C
with de-rating above 30°C*
SOUND POWER
Maximum 


103.9 dB
Sound Optimised Modes dependent on site and country

ROTOR
Rotor diameter
136 m
Swept area
14,527 m2
Air brake full blade feathering with 3 pitch cylinders
ELECTRICAL
Frequency
50/60 Hz
Converter
full scale
*subject to different temperature options

GEARBOX
Type
two planetary stages and one helical stage
TOWER

Hub heights Site and country specific
NACELLE DIMENSIONS

Height for transport
3.4 m
Height installed (incl. CoolerTop®)
6.9 m
Length
12.8 m
Width
4.2 m
HUB DIMENSIONS
Max. transport height
3.8 m
Max. transport width
3.8 m
Max. transport length
5.5 m
BLADE DIMENSIONS
Length
66.7 m
Max. chord
4.1 m
Max. weight per unit for transportation*
70 metric tonnes
*Excluding tower

AEP Curve


4 MW Platform

 

Our 4 MW platform is designed for a broad range of wind and site conditions, onshore and offshore enabling you to mix turbines across your site or portfolio of sites, delivering industry-leading reliability, serviceability and exceptional energy capture.

The 4 MW platform was introduced in 2010 with the launch of the V112-3.0 MW®. Over 23 GW of the 4 MW platform has been installed all over the world onshore and offshore making it the obvious choice for customers looking for highly flexible and trustworthy turbines.

Rotor diameters range from 105 to 150 meters and the rated output power is up to 4.2 MW. Using well proven technologies like a full-scale converter, the 4 MW platform meets even the most challenging grid requirements providing excellent energy yield in all wind and weather conditions.

Large Diameter Steel Towers (LDST) are also available to optimise annual energy production on low wind sites.

The 4 MW platform combines Vestas’ proven track record with our continuous efforts to improve and optimise our products, making it the obvious choice for customers looking to combine reliability with performance.


Related Products

V162-5.6 MW™ IEC S

With a swept area of over 20,000 m², the V162-5.6 MW™ applies the largest rotor size in the Vestas portfolio to achieve industry-leading energy production. The V162-5.6 MW™ IEC S is designed for low to medium wind sites, with extensive application in high wind speeds.

V150-5.6 MW™ IEC S

The V150-5.6 MW™ IEC S offers a large operational envelope and double-digit annual energy production improvements in medium to high wind speeds, depending on site-specific conditions.

V150-4.2 MW™ IEC IIIB/IEC S

With the V150-4.2 MW™ Vestas leads onshore wind power to new heights. With 73.7 meter long blades and the industry’s tallest tower, the V150-4.2 MW™ stretches nearly a quarter of a kilometer into the air.